Description
300 prc brass
LEVEL UP YOUR LONG RANGE SHOOTING WITH 300 PRC BRASS
300 PRC brass designed explicitly for long-range shooters. It is equipped with highly ballistic properties that let you fire high BC bullets easily.
The PRC brass has an ultra-convenient design that lets you load heavy bullets without compromising the shooting range.
Our 300 PRC brass in stock features a highly ballistic coefficient and comes in a modern design to meet every shooter’s needs.
We improvise its performance and are confident to share that it offers you faster performance than the 30
magnum and 300 Winchester magnum bullets available in the market.
300 PRC brass is an excellent choice for larger and open shooting areas and provides high precision shooting experience in long to mid-range.
It has a sturdy beltless case and premium ballistics that let you reload the refile fast and smoothly.
OVERVIEW OF 300 PRC BRASS
300 PRC brass is not an ordinary cartridge case. Our team conducts the quality check of all products before making it available at our online store.
It is a high-precision cartridge with a significant improvement in firing heavy bullets at long range.
Our 300 PRC brass in stock features a 0.532 inches head diameter, 30-degree shoulder, and no belts.
It has a faster twist barrel, allowing you to hit the target with higher precision.
- Cartridge length- 3.7 inches
- Brass Quantity- 100 Pieces
- Cartridge- 300 PRC
- Ballistic Coefficient- 0.673 | 0.777
- Shoulder angle- 30 Degree
FEATURES OF THE 300 PRC BRASS
The 300 PRC brass in stock, the precise rifle cartridge, is specifically designed for long-range shooting.
It contains brass that balances the rifle’s weight when you fire the bullet on long and medium-range targets.
The brass used in 300 PRC rifle cartridges is hard and perfect for firing large bullets. Some of the features of 300 PRC brass are as follows:
A STURDY BASE
There is no exception that the base of the rifle cartridge decides the preciseness of the shooting.
By keeping this factor in mind, we used the Lapua case that lets you reload the refile without putting it down.
The best part is that the base of the 300 PRC brass-for-sale rifle cartridge case has a longer life than ordinary ones,
and it serves hunters for years and brings the same consistency in shooting long-range targets.
A BRASS BODY
We used the pure form of brass to ensure the durability and long life cycle of our 300 PRC brass for sale.
Its dimension remains constant and holds the primers tightly in the pocket even after multiple reloading of the rifle.
In addition, you can extract it easily after firing, whether it’s your neck-size or full-size reloader.
We have 300 PRC brass in stock that you can easily buy from our site.
A CASE NECK
Strict adherence to advanced metallurgical techniques is essential to design the case neck of the 300 PRC brass.
The highly maintained brass neck is sufficient for repeated firing and has the required thickness and diameter per the long-range shooting requirements.
SHOP 300 PRC BRASS FROM AMMO METRO
If you are looking for an excellent place to purchase the 300 PRC brass in stock, then Ammo Metro is your ultimate destination.
Here, you will find the 300 PRC brass for sale at a competitive price and high quality.
We strictly follow the industry guidelines in making these rifle cartridges for long-range shooting purposes.
We acknowledge the needs of our customers and make improvements in our products from time to time.
You will get peace of mind and premium quality products when you shop from us
. So what are you waiting for? Visit our shop section to buy 300 PRC brass for sale now!
SPECIFICATIONS FOR LAPUA .300 PRC UNPRIMED RIFLE BRASS:
| Manufacturer: | Lapua |
| Gun Type: | Rifle |
| Bullet Type: | Brass |
| Cartridge: | .300 PRC |
| Primed: | No |
| Condition: | New |
| Brass Quantity: | 100 Piece |
300 prc brass Overview
Lapua World-class brass begins with high-quality raw materials and superior smelting and metallurgical competence.
Throughout the production process, the focus on quality control is consistent with Lapua’s exacting standards.
Particular attention is paid to hardness, solidity and grain structure.
All Lapua brass is tested to 30% overpressure according to Commission Internationale Permanente,
the agency that oversees ammunition and component producers in Western Europe. This is not loaded ammunition.
Brass Preparation: With bulk rifle brass you may sometimes notice a few case mouths are “out of round” or slightly dented below the shoulder.
These imperfections occur in the final tumbling wash operation after the case mouth has been annealed.
Brass manufacturers are aware of the case cosmetics and have worked to mitigate it, but due to equipment design, denting may still occur.
Minor dents are normally removed in the first firing and will not affect case life or performance.
On non-plated brass, you may also notice all the anneal stain might not be polished off, which may give the case neck a pinkish color.
With some smaller caliber cases you may notice the case mouths to be slightly belled.
With all new rifle brass, you should first straighten out the case and case mouth, then chamfer and debur the case mouth inside and out.
To straighten the case mouth, run the case part way into the sizer die and let the expander ball straighten the brass.
To prevent the case neck from stretching, be sure to lubricate the case neck inside the case mouth.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer| Shipping Weight | 4.300 Pounds |
Introduced to the shooting world in 2018 by Hornady, the PRC in .300 PRC stands for “Precision Rifle Cartridge”.
This new cartridge features a .532” head diameter, a 30-degree shoulder and unlike previous generations of magnum rifle cartridges, has no belt.
Coupled with long, heavy for caliber VLD target or hunting bullets and relatively fast twist rate barrels, the .300 PRC ushers in a new era of .30 caliber performance.
300 prc brass
“We keep a list in the front office of calibers that customers call or email about, and the .300 PRC is hands down the most requested caliber,”
states Derek Peterson, President of Peterson Cartridge.
He continues, “That amount of interest shouldn’t be ignored, so we developed the tooling and started producing them to meet that demand.
We look forward to hearing how they perform in the field and range, so please load some up and let us know how we did.”
300 prc brass Additional Information
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge.
Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for.
Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
Vanammo –
This is very consistently manufactured brass. Perfect for neck turning…brass is thick enough to consistently turn necks to 0.0140. I have another brand of brass that had to be neck turned down to 0.0125 in order to get consistent neck wall thickness. Overall weight of brass is also very consistent, insuring case volume is consistent.
Vanammo –
i will buy this again